वर्णक नीला 15:2
Technical parameters of Pigment blue 15:2
रंग सूचकांक नं। | वर्णक नीला 15:2 |
सीएएस संख्या | 12239-87-1 |
ईयू नंबर | 205-685-1 |
Chemical Group | Phthalocyanine |
आणविक वजन | 611.52 |
आण्विक सूत्र | C32H15CiCuN8 |
पीएच मान | 7.0 |
घनत्व | 1.5 |
तेल अवशोषण (एमएल / 100 ग्राम)% | 50 |
रोशनी तेजी | 8 |
उष्मा प्रतिरोध | 200 (°C) |
पानी प्रतिरोध | 5 |
तेल प्रतिरोध | 5 |
एसिड प्रतिरोध | 5 |
क्षार प्रतिरोध | 5 |
Benzene Resistance | 5 |
Ketone Resistance | 5 |
Soap Resistance | 5 |
Bleeding Resistance | 5 |
Migration Resistance | 5 |
Density ( g/cm3) | 1.5 |
Moisture (%) | ≤1.0 |
Water Soluble Matter (%) | ≤1.0 |
Oil Absorption (ml/100g) | 35-45 |
Electric Conductivity (us/cm) | ≤400 |
Residue on 325 mesh sieve (Wet method)PPM | ≤80 |
Magnetic on 325 mesh sieve (Wet method)PPM | ≤8 |
PH Value | 6.5-7.5 |
color | |
आणविक संरचना |
Handling and storage
Handling:
Usual precautions for nuisance dust should be observed.
Protection against fire and explosion:
The product is non-flammable
Storage:
Store in roofed places at room temperature Keep containers tightly sealed.
Flammability Class: nor applicable.
भौतिक और रासायनिक गुण
Appearance: blue powder Odor: mild
Melting point:460℃ Relative density:1.36-1.80
Decomposition: None Flammability: see 7 handling
Molecular formula:C32H16CuN8 Molecular Weight: 576.07
Tinting strength: 95-105% of the standard Volatile matter at 105℃: 2.5%max
Soluble matter in water: 1.5% max Oil absorption:28-62%
Fastness to light:7-8 Fastness to heat(℃):200
Bleeding resistance water: 5 Bleeding resistance linseed oil:5
Bleeding resistance acid:5 Bleeding resistance alkalis:5
Bleeding resistance alcohol:5 Bleeding resistance xylone:4
Bleeding resistance ethyl acetate:4
Stability and reactivity
Hazardous decomposition products
No decomposition at proper storage and application conditions
Toxicological Information
Because of experience with product mentioned, there are no recognizable hazards for human
beings, if it is correctly used and applied.
Ecological information
Avoid filtration into waster draining or soil.
Disposal considerations
Uses should acquaint themselves with local regulations.
Disposal is usually carried out by burying at an approved tip or by incineration by a licensed
waste material processor; stack gases may need to be sorubbed (see section 5 above)